|
|
|
|
|
|
|
|
|
|
|
|
|
|
Built-in wire stripper for number 14 wire. Built-in wire looper for pre-looping conductors. Screw-catch feature eliminates need to hand-thread screw and possible cross-threading. Double wipe ground contacts. Split circuit break-off tab. Side wire terminals accept up to number 10 solid or stranded wire. Push-in terminals accept number 14 solid wire only. 15 amp/125 volt. UL Listed, NOM certified, meets CSA requirements.
|
Built-in wire stripper for number 14 wire. Built-in wire looper for pre-looping conductors. Screw-catch feature eliminates need to hand-thread screw and possible cross-threading. Double wipe ground contacts. Split circuit break-off tab. Side wire terminals accept up to number 10 solid or stranded wire. Push-in terminals accept number 14 solid wire only. 15 amp/125 volt. UL Listed, NOM certified, meets CSA requirements.
|
Built-in wire stripper for number 14 wire. Built-in wire looper for pre-looping conductors. Screw-catch feature eliminates need to hand-thread screw and possible cross-threading. Double wipe ground contacts. Split circuit break-off tab. Side wire terminals accept up to number 10 solid or stranded wire. Push-in terminals accept number 14 solid wire only. 15 amp/125 volt. UL Listed, NOM certified, meets CSA requirements.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Built-in wire stripper for number 14 wire. Built-in wire looper for pre-looping conductors. Screw-catch feature eliminates need to hand-thread screw and possible cross-threading. Double wipe ground contacts. Split circuit break-off tab. Side wire terminals accept up to number 10 solid or stranded wire. Push-in terminals accept number 14 solid wire only. 15 amp/125 volt. UL Listed, NOM certified, meets CSA requirements.
|
Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Unbreakable top and bottom housing. Industrial design cam action mechanism insures quiet switch action. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper for pre-looping. Double riveted switch. Three way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips and Robertson-head terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements. UL Listed.
|
Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Unbreakable top and bottom housing. Industrial design cam action mechanism insures quiet switch action. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper for pre-looping. Double riveted switch. Three way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips and Robertson-head terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements. UL Listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Unbreakable top and bottom housing. Industrial design cam action mechanism insures quiet switch action. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper for pre-looping. Double riveted switch. Three way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips and Robertson-head terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements. UL Listed.
|
Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Unbreakable top and bottom housing. Industrial design cam action mechanism insures quiet switch action. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper for pre-looping. Double riveted switch. Three way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips and Robertson-head terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements. UL Listed.
|
Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Unbreakable top and bottom housing. Industrial design cam action mechanism insures quiet switch action. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper for pre-looping. Double riveted switch. Three way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips and Robertson-head terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements. UL Listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Receptacle is tamper resistant with a UL Listed shutter system and impact-resistant thermoplastic face and back body that is virtually unbreakable. The 2008 National Electrical Code (NEC) states that "Effective January 1, 2008, all receptacles installed in new dwelling units must be tamper-resistant." Features a wire stripper for #14 and #12 wire, extra long and wide mounting straps and tri-combo screws that accept slotted, Phillips and Robertson-head tools. Terminal screws are backed out and ready to wire. Side-wire terminals accept up to #10 solid or stranded wire. Push in terminals accept #14 solid wire. Screw-catch feature speeds wall plate installation. UL, cULus Listed.
|
Receptacle is tamper resistant with a UL Listed shutter system and impact-resistant thermoplastic face and back body that is virtually unbreakable. The 2008 National Electrical Code (NEC) states that "Effective January 1, 2008, all receptacles installed in new dwelling units must be tamper-resistant." Features a wire stripper for #14 and #12 wire, extra long and wide mounting straps and tri-combo screws that accept slotted, Phillips and Robertson-head tools. Terminal screws are backed out and ready to wire. Side-wire terminals accept up to #10 solid or stranded wire. Push in terminals accept #14 solid wire. Screw-catch feature speeds wall plate installation. UL, cULus Listed.
|
Receptacle is tamper resistant with a UL Listed shutter system and impact-resistant thermoplastic face and back body that is virtually unbreakable. The 2008 National Electrical Code (NEC) states that "Effective January 1, 2008, all receptacles installed in new dwelling units must be tamper-resistant." Features a wire stripper for #14 and #12 wire, extra long and wide mounting straps and tri-combo screws that accept slotted, Phillips and Robertson-head tools. Terminal screws are backed out and ready to wire. Side-wire terminals accept up to #10 solid or stranded wire. Push in terminals accept #14 solid wire. Screw-catch feature speeds wall plate installation. UL, cULus Listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Receptacle is tamper resistant with a UL Listed shutter system and impact-resistant thermoplastic face and back body that is virtually unbreakable. The 2008 National Electrical Code (NEC) states that "Effective January 1, 2008, all receptacles installed in new dwelling units must be tamper-resistant." Features a wire stripper for #14 and #12 wire, extra long and wide mounting straps and tri-combo screws that accept slotted, Phillips and Robertson-head tools. Terminal screws are backed out and ready to wire. Side-wire terminals accept up to #10 solid or stranded wire. Push in terminals accept #14 solid wire. Screw-catch feature speeds wall plate installation. UL, cULus Listed.
|
Receptacle is tamper resistant with a UL Listed shutter system and impact-resistant thermoplastic face and back body that is virtually unbreakable. The 2008 National Electrical Code (NEC) states that "Effective January 1, 2008, all receptacles installed in new dwelling units must be tamper-resistant." Features a wire stripper for #14 and #12 wire, extra long and wide mounting straps and tri-combo screws that accept slotted, Phillips and Robertson-head tools. Terminal screws are backed out and ready to wire. Side-wire terminals accept up to #10 solid or stranded wire. Push in terminals accept #14 solid wire. Screw-catch feature speeds wall plate installation. UL, cULus Listed.
|
CULus Listed, NOM certified.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CULus Listed, NOM certified.
|
Standard contacts. Side wire terminals accept up to #12 wire. Terminal screws backed out, ready for wiring. 15 amp/125 volt. UL Listed.
|
Standard contacts. Side wire terminals accept up to #12 wire. Terminal screws backed out, ready for wiring. 15 amp/125 volt. UL Listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Standard contacts. Side wire terminals accept up to #12 wire. Terminal screws backed out, ready for wiring. 15 amp/125 volt. UL Listed.
|
Triple wipe line contacts provide long-term plug retention. Double wipe ground contacts. 0.050" thick steel wrap-around mounting strap zinc-plated for corrosion resistance. Split circuit break-off tab. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Side wire terminals accept up to #10 solid or stranded wire. Meets all UL 498 requirements UL Listed.
|
Replacement knob for Skylark dimmers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacement knob for Skylark dimmers.
|
Replacement knob for Skylark dimmers.
|
Triple wipe line contacts provide long-term plug retention. Double wipe ground contacts. 0.050" thick steel wrap-around mounting strap zinc-plated for corrosion resistance. Split circuit break-off tab. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Side wire terminals accept up to #10 solid or stranded wire. Meets all UL 498 requirements UL Listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Triple wipe line contacts provide long-term plug retention. Double wipe ground contacts. 0.050" thick steel wrap-around mounting strap zinc-plated for corrosion resistance. Split circuit break-off tab. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Side wire terminals accept up to #10 solid or stranded wire. Meets all UL 498 requirements UL Listed.
|
Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for number 14 and number 12 wire and wire looper for pre-looping. Combination slot/Phillips head mounting and terminal screws for installation with power screwdrivers. Terminal screws backed out - ready for wiring. Side wire terminals accept up to number 10 solid or stranded wire. Push-in terminals accept number 14 solid wire. Temperature range of -40 to 65 degrees C. Meets all UL 498 requirements, (file no. E15058), Fed. Specs. WC-596G, NOM Certified, CSA Certified, C22.2 no.42. Standard Grade: (file no.6914) (6233-01). Meets flammability requirements per UL94, V2 rated. 15 amp, 125 volt.
|
Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for number 14 and number 12 wire and wire looper for pre-looping. Combination slot/Phillips head mounting and terminal screws for installation with power screwdrivers. Terminal screws backed out - ready for wiring. Side wire terminals accept up to number 10 solid or stranded wire. Push-in terminals accept number 14 solid wire. Temperature range of -40 to 65 degrees C. Meets all UL 498 requirements, (file no. E15058), Fed. Specs. WC-596G, NOM Certified, CSA Certified, C22.2 no.42. Standard Grade: (file no.6914) (6233-01). Meets flammability requirements per UL94, V2 rated. 15 amp, 125 volt.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Receptacle is tamper resistant with a UL Listed shutter system and impact-resistant thermoplastic face and back body that is virtually unbreakable. The 2008 National Electrical Code (NEC) states that "Effective January 1, 2008, all receptacles installed in new dwelling units must be tamper-resistant." Features a wire stripper for number 14 and number 12 wire, extra long and wide mounting straps and tri-combo screws that accept slotted, Phillips and Robertson-head tools. Terminal screws are backed out and ready to wire. Side-wire terminals accept up to number 10 solid or stranded wire. Push in terminals accept number 14 solid wire. Screw-catch feature speeds wall plate installation. 15 amp, 125 volt. NEMA 5-15R. UL, cULus Listed.
|
Replacement knob for Rotary dimmers.
|
Replacement knob for Rotary dimmers.
|
|
|
