|
|
|
|
|
|
|
|
|
|
|
The Danco square broach valve handle replaces a lost or stripped handle and improves the operation of the valve. It is designed for use on hose Bibb faucets, sillcocks, stopcocks and valves. It features a metal construction that will endure the rigors of everyday use.
|
The Danco round broach valve handle replaces a lost or stripped handle and improves the operation of the valve. It is designed for use on hose Bibb faucets, sillcocks, stopcocks and valves. It features a metal construction that will endure the rigors of everyday use.
|
The Danco round broach valve handle replaces a lost or stripped handle and improves the operation of the valve. It is designed for use on hose Bibb faucets, sillcocks, stopcocks and valves. It features a metal construction that will endure the rigors of everyday use.
|
|
|
|
|
|
|
|
|
|
|
|
|
For used with cold water applications, TPV seats NBR O-rings, fits both Schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.
|
Plumb Pak Sillcock Faucet Handle, Suitable for: Square Stem
|
For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G.
|
|
|
|
|
|
|
|
|
|
|
|
|
For used with cold water applications, TPV seats NBR O-rings, fits both Schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.
|
For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G.
|
Fits most drainable valves. Three styles of caps with washers included.
|
|
|
|
|
|
|
|
|
|
|
|
|
Plumb Pak Sillcock Faucet Handle, Wheel Handle, Suitable for: 1/4 in Square Stem
|
12 point.
|
Rated for 150 psi at 73 deg F, for use with cold-water applications, gray color, PTFE seats, EPDM O-rings. Threaded ends comply with ANSI B1.20.1. Certified to NSF 61-G. Lead-free compliant.
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits both SCH 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air.
|
Fits both SCH 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air.
|
16 point.
|
|
|
|
|
|
|
|
|
|
|
|
|
Plumb Pak Coin Air Valve, Metal, Satin Nickel, Dimensions: 2.94 in L x 2 in W x 2.06 in H
|
Rated for 150 psi at 73 deg F, for use with cold-water applications, gray color, PTFE seats, EPDM O-rings, solvent ends comply with ASTM D2466, certified to NSF 61-G. Lead-free compliant.
|
The V-3 Vacuum Breaker prevents dangerous back-siphonage and backflow into a potable water supply. The V-3 is equipped with a protruding tip device for manual draining of a faucet (after hose removal), which prevents freezing. The V-3 is also available in a chrome-plated version (V-3C). These units are not intended for use where water contamination could occur as a result of draining or for permanent continuous pressure installation. For continuous pressure systems, install the BFP Dual Check Valve.
|
|
|
|
|
|
|
|
|
|
|
|
|
Rated for 150 psi at 73 deg F, for use with cold-water applications, gray color, PTFE seats, EPDM O-rings. Threaded ends comply with ANSI B1.20.1. Certified to NSF 61-G. Lead-free compliant.
|
Used to control the flow of water to household plumbing fixtures and appliances. Ideal for maintenance and repair without having to shut-off water to the entire home. Used where the water pipe enters the room to allow for easy shut-off of water flow to the end fixture allowing for maintenance and repair without having to turn water off to the entire home. Typically used on stub-outs coming out of the wall. Certified for use in potable water systems.
|
For used with cold water applications, TPV seats NBR O-rings, fits both Schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G.
|
CPVC construction. For use with hot or cold water. Rated for 100 psi at 180 deg F. Not for use with compressed air. Solvent connection for use with CPVC tubing size pipe. Solvent ends comply with ASTM 2846. Certified to NSF 61.
|
CPVC construction. For use with hot or cold water. Rated for 100 psi at 180 deg F. Not for use with compressed air. Solvent connection for use with CPVC tubing size pipe. Solvent ends comply with ASTM 2846. Certified to NSF 61.
|
|
|
|
|
|
|
|
|
|
|
|
|
Plumb Pak Tee Valve Faucet Handle, Suitable for: 12/16 Lawn Faucet or Valve
|
Used to control the flow of water to household plumbing fixtures and appliances. Ideal for maintenance and repair without having to shut-off water to the entire home. Used where the water pipe enters the room to allow for easy shut-off of water flow to the end fixture allowing for maintenance and repair without having to turn water off to the entire home. Typically used on stub-outs coming out of the wall. Certified for use in potable water systems.
|
Plumb Pak Shut-Off Valve, 1/2 x 3/8 in Connection, Sweat x Compression Connection, Number of Ports/Ways: 2, Media: Water, Body Material: Brass, Chrome, Dimensions: 4 in W x 5-1/2 in H
|
|
|
|
|
|
|
|
|
|
|
|
|
Chrome.
|
Durable sonic welded thermo-plastic body.
|
Durable sonic welded thermo-plastic body.
|
|