|
|
|
|
|
|
|
|
|
|
|
|
|
|
Diablo's premium flat edge sanding sponges include break-through innovations for superior sanding performance, extended sanding life and increased hand-sanding productivity. Featuring a premium aluminum oxide blend, these flat sanding sponges remove material faster and offer up to 3X longer sanding life versus standard hand sanding sheets. The flat edges make it easy to access inside corners and hard to reach surfaces and the longer length allow for sanding medium surface areas. The full contact design provides maximum sanding potential by delivering consistent scratch patterns and ultra-smooth finishes. The superior grain bonding system, ENDURA-BOND?, provides Diablo's sanding blocks with longer life and extreme durability.
|
Diablo Flat Sanding Sponge, Size: L, Endura-Bond Bond, 5 in Length, 3 in Width, 1 in Thickness, 60 Grit, Foam Backing, Medium Grit Grade, Aluminum Oxide Abrasive, Applicable Materials: Fiberglass, Metal, Plastics, Wood
|
Freud Backing Pad, 9 in Diameter, Black, Suitable for: Drywall Sander
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Easily converts Norton hand sanders to pole sanders for extra flexibility in stairwells, on ceilings and hard-to-reach areas.
|
Marshalltown's lightweight, 9 x 3-1/4 in hand sander can be used to sand drywall joints or other general sanding projects. It's designed to hold die-cut, half sheets of standard sandpaper, or sandscreen. The hand sander has a flexible aluminum backing plate bonded to a foam pad. It comes with a DuraSoft handle that provides comfort and reduces fatigue. Our contractor-grade QLT hand sanders comes with a soft grip, structural foam, or plastic handle. Marshalltown's hand sander is made in the USA with global materials.
|
High-gloss lacquered wooden handle. Fits any pole sander with standard broom thread.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
One-piece plastic handle and backing plate. Bonded foam pad, designed for sanding drywall joints. Used for pre-cut or a half sheet of sandpaper. Great for drywall sanding, flat surface of wood, metal, automotive, bathtub, furniture, etc.
|
Structural foam with stainless wire clips. New integral molded pad. Uses DWS drywall sheets or 1/2 sheet of sandpaper. 9 in x 3.375 in x 3 in.
|
The Homax? hand sander can be used with both sandpaper and sanding screens. The cushioned backing is designed to fit the hand for easy pressure. Constructed from heavy-duty, high-impact polystyrene, the Homax? hand sander is reusable, easy-to-clean and economical. Home improvement tasks can be less of a hassle if you have the right tools on hand. Homax? helps make DIY projects easy with our durable and economical drywall tools.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The pole sander increases productivity thanks to a swivel head that assures flat surface contact without tipping or rocking. This unique sanding design can be used as a hand sander or used with a pole. It's for use when finishing drywall projects.
|
Gator hook and loop drywall sanding sheets are the next evolution in drywall sanding. Designed to be used with the Gator hook and loop pole and or hand sander, these sheets provide great finishing results with extremely quick sheet changing. No more fumbling with the old fashioned clamps on your old sander, simply line up the sheet and "stick-it" in place that's it. So if you are a professional contractor or you just want the easiest way to sand your next drywall project, reach for the Gator hook and loop drywall system.
|
The MARSHALLTOWN pole sander has a low profile, no slip swivel bracket that makes this an ideal tool for sanding drywall joints until they're flush with the surrounding walls. It is made from lightweight, reinforced die-cast aluminum and bonded to a foam rubber pad for extra durability. The blade has quick-change locking clamps for quicker sandpaper replacement. This pole sander is also available in the contractor-grade QLT brand. Choose between a lightweight injection molded plastic or die-cast aluminum blade material. Both the MARSHALLTOWN and QLT brand pole sanders are available with or without a handle.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Gator hook and loop drywall sanding sheets are the next evolution in drywall sanding. Designed to be used with the Gator hook and loop pole and or hand sander, these sheets provide great finishing results with extremely quick sheet changing. No more fumbling with the old fashioned clamps on your old sander, simply line up the sheet and "stick-it" in place that's it. So if you are a professional contractor or you just want the easiest way to sand your next drywall project, reach for the Gator hook and loop drywall system.
|
The hand sander general is used to remove excess drywall mud product after finished application resulting in a smooth surface.
|
Sand ceilings and walls with both feet on the floor. Structural foam with stainless steel wire clips. Fits any mop or broom stick. Lightweight. Integral molded pad.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Homax? pole sander attaches to any standard size wooden or metal pole, such as a broom handle. Constructed of heavy-duty yellow plastic, the pole sander has a pivoting head which is ideal for hard-to-reach areas when sanding vertical joints & ceilings.
|
Made from hardwood with a hammerhead tip. For use with pole sanders #14428, #14426 and #14660.
|
Sand large areas including drywall with ease. The "Quick-change" hook-and-loop holding system allows faster sheet changes. Sanding sheet refills: SKU # 755.4231, # 528.7214, #833.8048.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The pole sander increases productivity thanks to a swivel head that assures flat surface contact without tipping or rocking. This unique sanding design can be used as a hand sander or used with a pole. It's for use when finishing drywall projects.
|
|
Diablo's premium flat edge sanding sponges include break-through innovations for superior sanding performance, extended sanding life and increased hand-sanding productivity. Featuring a premium aluminum oxide blend, these flat sanding sponges remove material faster and offer up to 3X longer sanding life versus standard hand sanding sheets. The flat edges make it easy to access inside corners and hard to reach surfaces and the longer length allow for sanding medium surface areas. The full contact design provides maximum sanding potential by delivering consistent scratch patterns and ultra-smooth finishes. The superior grain bonding system, endura-bond, provides Diablo's sanding blocks with longer life and extreme durability.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Lightweight aluminum backing plate bonded to foam pad. DuraSoft? handle provides soft feel. Uses die-cut or a half sheet sandpaper.
|
Homax? 5-piece drywall taping kit provides everything you need to achieve a professional finish for your drywall project. Hanging or repairing drywall can be less of a hassle if you have the right tools on hand. All items in the Homax? 5-piece drywall taping kit are constructed of heavy-duty, lightweight, high-impact polystyrene. They are easy-to-clean and use. This kit is ideal for both new and patch and repair drywall jobs. Designed for do-it-yourselfers and contractors, the Homax? 5-piece drywall taping kit is the economical, organized choice for any drywall project.
|
Ideal for sanding larger surface areas. The lightweight, circular design virtually eliminates flipping and allows change of direction up/down and left/right without lifting off the wall. Works with a 9 in hook-and-loop sanding disc.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Comfortable overmold handle with "EasyClamp" system for quickly changing abrasive sheets. Aluminum backed rubber sanding pad. Rubberized handle allows for more powerful sanding.
|
Rust-resistant backing plate bonded to foam rubber pad. Smooth contour handle. Exclusive one-piece handle clamp design for easy sandpaper attachment. Uses die-cut or a half sheet sandpaper.
|
Sands both inside seams of a drywall corner. The lightweight, 90 deg design provides a smooth edge with less risk of wall damage commonly caused by sanding each side separately. Works with 8 in x 7 in hook-and-loop sanding sheet.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
If you're looking for a drywall product that will perform above your expectations, then you want to try the new Gator 9 in. Drywall Radial Sander. Gator Finishing's Drywall Sander improves the sanding process by being able to cover larger areas in a shorter amount of time. The cushioned tapered edge allows you to sand into corners without damaging the wall, while the no flip bracket allows for worry-free sanding. The hook and loop holding system makes it quick and easy to change out the sanding discs, as well as keep the paper nice and tight with no slipping. The end result is a more even finish. The sander is designed to be used with our premium 9 in. Drywall sanding discs which feature CeraMax? technology, the next generation in sanding and finishing. The CeraMax? grain combines the highest quality materials to produce the fastest cutting and longest lasting abrasives available today, and is designed to last 4 times longer and sand 4 times faster compared to standard abrasive paper. Available in 3 grits, 80/120/180, your walls will be smooth and ready for paint in no time. Pick one up today and see for yourself why drywall professionals are making the Gator 9 in. Drywall radial sander their new "Go-To" drywall sanding tool.
|
The MARSHALLTOWN pole sander has a low-profile, no-slip swivel bracket that makes this an ideal tool for sanding drywall joints until they're flush with the surrounding walls. It is made from lightweight, reinforced die-cast aluminum and bonded to a foam rubber pad for extra durability. The blade has quick change locking clamps for quicker sandpaper replacement. This pole sander is also available in the contractor grade QLT brand. Choose between a lightweight injection molded plastic or die-cast aluminum blade material. Both the MARSHALLTOWN and QLT brand pole sanders are available with or without a handle.
|
The "Quick-change" hook-and-loop holding system eliminates sheets from tearing along the clamped on edges. Angled pad reduces the risk of "flipping".
|
|
|
